|
|
Build Your Online Product Catalogs?
| Product Name: |
RTV2 liquid silicone rubber for nipple, diving glass
|
| Supply Ability: |
500ton |
| Related proudcts |
|
| Specifications |
ADL3108 |
| Price Term: |
|
| Port of loading: |
Shenzhen China |
| Minimum Order |
200kg |
| Unit Price: |
|
|
ADL3108 serious RTV2 liquid silicone rubber
1.Features:
ADL3108 serious RTV2 liquid silicone rubber has high tran***rency, high tear strength and elasticity.It is anti-aging, resistent to light and optical medicines and has good adiabaticity.
2.Typical application:
Especially suitable for injection molding nipple,diving glass and other silicone rubber products.
3.Usage:
Measurement: Be exact Metage for A and B components.
Whipping: Adding B to vessel with A then mixing equably.
Defoaming:: Put the mixture in the vacuum deaeration device.Usually,it should not be pumped when there is no bubble. Deaeration time is suggested to be 5 to 10 minutes or so.If there is no deaeration device,the next step can be proceeded when there is no foam in the mixed material,usually one hour after mixing.
Injection molding:Put the mixed material which has been defoamed into the mold.The injection molding should be made under appropriate pressure,temperature , cycle and other conditions.
4.Precautions:
£¨1£©Mixing A&B compenent equably before using.
£¨2£©The mixed material should be in sealed storage and be used up during the safety operation,or it¡¯ll slowly cure to wastage
£¨3£©It has the connection for curing time to temperature of the material, the lower for the temperature,the longer for its curing time.
£¨4£©It¡¯s non-dangerous goods.But pls don¡¯t have it touch mouth or eyes .If it happens,pls flushing yourself quickiy with enough rinsing.
£¨5£©This product should be avoided being mixed with another kind of organic tin catalyst such as amines, sulfur, phosphorus compounds and some metal salts.Otherwise,the catalyst of this product will be useless that the mixed material will not be cured.
5.Technical Index
Property / Model No. ADL3108-40 ADL3108-45 ADL3108-50 ADL3108-60 ADL3108-70
Before vulcanization Exterior Tran***rent Tran***rent Tran***rent Tran***rent Tran***rent
Gravity g/cm3 1.10 1.10 1.12 1.15 1.15
Viscosity Pa.S 550 550 650 650 650
A:B 1:1 1:1 1:1 1:1 1:1
Curing time |
| Company: |
Shenzhen Andelu Technology Co., Ltd.
|
| Contact: |
Ms. Cissy Woo |
| Address: |
ShangMeiLin Street |
| Postcode: |
518049 |
| Tel: |
0755-83953360 |
| Fax: |
0755-83953360 |
| E-mail: |
|
|
|
|
Home
