|
|
Build Your Online Product Catalogs?
| Product Name: |
coating silicone rubber
|
| Supply Ability: |
500ton |
| Related proudcts |
|
| Specifications |
ADL2104 |
| Price Term: |
|
| Port of loading: |
Shenzhen China |
| Minimum Order |
200kg |
| Unit Price: |
|
|
ADL2104 Coating Liquid Silicone Rubber(Addition Type)
Model No.:ADL2104
1.Application:
Coated on Floriation band, brassiere,cloth belt,garter,non-slip sling,medical garter for anti-slip.
2.Description
Medium Temperature Two-component Coating Liquid Silicone Rubber(Addition Type),especially suitable for coated on floriation band and brassiere for anti-slip.
3.Features:
It can be cured in room temperature;the higher the temperature is,the shorter the curing time is.It has excellent anti-slip properties,high tear strength,high tran***rency,good tensile strength,low hardness,no pollution,good texture,and be three-dimensional,washable and wear-resistant.
4.£ºTechnical Index:
Exterior Tran***rent liquid
Viscosity 60***.S
Gravity£¨25℃£© 1.05
Ratio A£ºB=10£º1
Operating time 1-2Сʱhours
Tensile Strength ¡Ý4.0***
Tear Strength ¡Ý2.5kN/m
Elongation At Break ¡Ý800%
Hardness 30-400A
Curing Conditions 180℃/5-10min
5.Usage:
Measurement: Be exact Metage for A and B components.
Whipping: Adding B to vessel with A then mixing equably.
Defoaming:: Put the mixture in the vacuum deaeration device.Usually,it should not be pumped when there is no bubble. Deaeration time is suggested to be 5 to 10 minutes or so.If there is no deaeration device,the next step can be proceeded when there is no foam in the mixed material,usually one hour after mixing.
Injection molding:Put the mixed material which has been defoamed into the mold.The injection molding should be made under appropriate pressure,temperature , cycle and other conditions.
6.Precautions:
£¨1£©Mixing A&B compenent equably before using.
£¨2£©The mixed material should be in sealed storage and be used up during the safety operation,or it¡¯ll slowly cure to wastage
£¨3£©It has the connection for curing time to temperature of the material, the lower for the temperature,the longer for its curing time.
£¨4£©It¡¯s non-dangerous goods.But pls don¡¯t have it touch mouth or eyes .If it happens,pls flushing yourself q |
| Company: |
Shenzhen Andelu Technology Co., Ltd.
|
| Contact: |
Ms. Cissy Woo |
| Address: |
ShangMeiLin Street |
| Postcode: |
518049 |
| Tel: |
0755-83953360 |
| Fax: |
0755-83953360 |
| E-mail: |
|
|
|
|
Home
